Advantages:Water Filtration Life System Reverse Osmosis For Commercial Use
1) Our company's RO reverse osmosis equipment adopts key components, equipment adopts International brand.
2) advanced technology, reliable quality, strong expandability, reasonable structure and small area.
3) high water utilization rate, low energy consumption, fully automated operation, simple operation and maintenance.
4) According to user requirements design and manufacture of reverse osmosis system.
5) The general production limit of 0.25m3/hr, the upper limit is not limited, the water recovery rate can reach more than 75%, salt rejection > 98%.
6) The amount of water produced varies with the temperature of the incoming water and the aging or contamination of the reverse osmosis membrane.
Water source:Water Filtration Life System Reverse Osmosis For Commercial Use
II. Indicators of commonly used water quality
1. chroma: pure water is colorless, odorless and transparent liquid, if water with color is mostly caused by impurities in water. The color of the water is dark and dark, usually expressed by color. Clean natural water color is generally 15~25 degrees, containing more humus lake water, reservoir water color can reach more than 50 degrees.
2. turbidity: natural water contains a large number of suspended particles and colloids, their common characteristic is to make the water turbid sense, turbidity is used to reflect the water suspended matter and colloid on the degree of clarity and transparency of the water, but also reflect the amount of suspended matter and colloid in water.
3.pH value: relative content of acid and base in solution. pH value is the unit of measure of the negative logarithm (log) of hydrogen ion concentration in water. pH value is divided into 0~14 blocks, pH value is 7.0, water is neutral; pH value is less than 7.0, water is acidic; pH value is greater than 7.0. then the water is alkaline.
4. hardness: refers to the content of calcium and magnesium ions in the water source, because they can form a hard scale, so called hardness. In contrast, the process of removing calcium and magnesium ions in water is called softening,
5. conductance: dissolved charged ions in water will move under the action of electric field, that is, there is current passing through, so water is conductive, the conductivity of water is electrical conductivity, the size of conductivity is proportional to the amount of charged ions in water, so the conductivity can be used to reflect the dissolved ion content in water. Electrical conductivity units :µs/cm...
6. resistance: reciprocal of conductance, unit: MΩ•cm..
Product Index:Stainless Steel Reverse Osmosis Ro System Water Filter
FAQ:Water Filtration Life System Reverse Osmosis For Commercial Use
1. Q: Which machine should I choose?
A: It depends on your raw water quality and your requirements for permeate water.
Usually there are three parts: pretreatment, RO machine, and post treatment. Pretreatment could be UF(ultra filtration) system, anti-scale dosing system, flocculant dosing system, disinfectant dosing system, water softener, sand filter, carbon filter, security filter etc. Post treatment could be UV sterilizer, Ozonizer, ClO2 sterilizer, etc. And maybe you need an EDI system. We will choose proper process according to your raw water quality and permeate water purpose.
2. Q: What’s your machine material?
A: For pretreatment tanks, we usually use FRP or S.S. The RO frame could be S.S, carbon steel.For pipes, it is usually S.S and UPVC. We can choose material according to your special requirements.
3. Q: What’s the control method?
A: For pretreatment, you can choose manual or automatic; for the whole system, we use relay, PLC or man-machine interface remote control.
4. Q: Which spare parts need to change regularly?
A: Filter cartridge in the security filter and RO membranes. For filter cartridge, it needs to change each 3-6 months, and for RO membrane, you need to change each 1-3 years. It depends on your water quality and how you maintain the machine.
5. Q: What’s your warranty?
A: Our warranty is 1 year. But to our experience, our machine can work 5 years before repair.
6. Q: Do you provide installation and training?
A: Yes, we can send our technician to your site for installation or training. Or you can send your staff to our factory for training.
7. Q: What’s your electricity requirement?
A: Our machine could be 380V/220V/110V, 50HZ/60HZ, 3 phase/single phase. We can do customer made products.
8. Q: What’s your machine size?
A: It depends on the capacity requirement and we can make changes according to your space.
9. Q: What’s the purchase procedure?
A:Customer send Inquiry -----we provide solution and quotation-----customer confirm and place order-----we send PI-----customer make first payment----we arrange production----customer make the rest payment-----we ship goods from our factory.
